N95,N99,N100 Meltblown

Medical Grade PP Meltblown Fabric Features

Fuyang Sensi supplies filter material for face masks and respirators, the main applications are for surgical use and labor-protective use. Our melt-blown for surgical face masks meet EN14683, BFE 99% above. The melt-blown material for dustproof respirators meets European EN 149:2001 and American NIOSH42 CFR-84. They can be used to manufacture face mask or respirators for the grades as European standard FFP1, FFP2, FFP3, and the US Standard N95, N99, N100, R95, R99 and Korea Standard KF80, KF94, KF99 different face masks used for medical and surgical industrial or labor protective, dustproof application.

Our melt-blown has the special characteristics of high efficiency, light weight, low resistance, long-lasting bacteria filtration, and high penetration resistance. 

These kinds of meltblown are all eco-friendly, breathable, anti-tear, waterproof, anti-bacterial, anti-pull, mothproof. These medical mask filter material conform to the standard EN14683:2003, ASTM F2100-2004, EN14683:2014, and will be tested by TSI 8130.

We have been exported to Russia, Taiwan, Thailand, Malaysia, Indonesia, Vietnam, Canada, Pakistan, Singapore, Portuguesa, Spain, Brazil, etc. The products can be produced according to the customer specified index.

Medical Grade PP Meltblown Fabric Nonwoven Application 

Surgical face masks, medical face masks.

N95,N99,N100

This melt-blown can meet US NIOSH standard 42 CFR84. It can be produced according to the customer specified index. We can produce by clients' requirements of resistance data and provide different penetration of melt-blown fabric.

Medical Grade PP Meltblown Fabric Types 

We can provide different standards of melt-blown used for different products, especially the 25g/sm-40g/sm N95 melt-blown, which is widely used to produce medical face masks and sell very well and popular in different countries.

Medical Grade PP Meltblown Fabric Description 

Meltblown is produced in a process where polypropylene granules are melted and molten polymer is extruded through spinnerets. The continuous filaments are cooled and deposited on to a conveyor belt to form a uniform web. The calendering uses heat and high pressure applied through rollers to weld the fiber webs together at speed. This results in a soft, uniform melt-blown material.

1. Infunde the grainy type polypropylene into the pond

2. Polypropylene is conveyed to the inside of the machine body and melt

3. The melt pp will be delivered to the spinning pump and spin, fine draw, the melt pp changes into superfine fiber. The temperature of the superfine fiber is cooled by the side cold air and it will be further stretched during cooling

4. The stretched superfine fiber is transferred to the web former. Forming the embryonic form of non woven pp meltblown fabric

5. The non woven fiber web transferred to calender by net screen and will be pressed by calendar, rolling up the completed meltblown fabric rolls

6. Cut off the edges on both sides,eventually become a non woven coiled material