Fuyang Sensi Trading Co.,ltd.
Quality,Careful & Health,
One-stop supplier of face masks raw material!
Contact Supplier
NOTICE ! ! !

Fuyang Sensi Trading Co., Ltd only has factories and offices in China. We do not have any offices or branches in overseas. Please pay attention to prevent the buyers from being cheated.

Any overseas embezzlement of our website links, website text, pictures, and videos is cheating.

Our contact information is only the emails and telephone on our website, others contact information is all fake.

Lates Posts
  • Structural Principle of Producing Meltblown Non-woven Fabric Line
    07-21.22
    Meltblown non-woven fabrics are different from traditional spunbond production. It uses high-speed hot air to stretch the polymer trickle from the spinneret hole of the module, and turns it into an ul...
  • The Reasons for the Uneven Thickness of Non-woven Fabrics During Production
    07-07.22
    Many friends say that under the same processing conditions, the thickness of non-woven fabrics is uneven during production. So what are the reasons? We specifically summarize the following points:Ⅰ. ...
  • Characteristics and Application of Polypropylene Spunbonded Non-woven Cloth
    01-17.22
    Spunbond non-woven fabric, also known as polypropylene spunbond non-woven cloth, is a new generation of environmentally friendly materials, which is waterproof, breathable, flexible, non-combustible, ...
Free Quote

Structural Principle of Producing Meltblown Non-woven Fabric Line

Meltblown non-woven fabrics are different from traditional spunbond production. It uses high-speed hot air to stretch the polymer trickle from the spinneret hole of the module, and turns it into an ultra-fine short fiber. , guide it to the roller to cool, and rely on its own adhesive force to form.


1. The production process of meltblown non-woven fabrics


It is a flow process, from the loading and unloading of polymer materials, to the melting and extrusion of materials, after the metering of the metering pump, the meltblown non-woven fabric is sprayed using a special spinneret hole module, and the high-speed hot air blows the material. The trickle of the polymer coming out of the spinneret hole is reasonably stretched and guided. After cooling, it is formed on the roller, and the material is received and processed at the lower end in one go. Problems in any link may cause production interruption. Problems must be found in time. Solve problems in a timely manner.


2. Structure of meltblown non-woven fabric


Meltblown non-woven production line, including many single equipment, such as feeding polymer feeder, screw extruder, metering pump device, spinneret module, heating system, air compressor and cooling system, receiving and winding device.


These melt-blown non-woven fabrics work alone and are jointly commanded by plc and industrial computer to form a synchronization and tension control system, which is useful for frequency converters to control extrusion and transmission, winding, etc., as well as temperature control systems to control heating , the frequency converter will also control the fan and cooling.


Some mechanical problems are easy to find and solve. For example, if a certain drive roller bearing is broken, it will make abnormal noises. It is also easy to find suitable accessories to replace. Or the reducer of the screw is broken, which will obviously cause speed fluctuations and make a loud noise.

Structural Principle of Producing Meltblown Non-woven Fabric Line
http://www.fysensi.com